Neuson Raupenbagger ET18 Wacker Nauson ET18 (E12-02)

General data: Brand: WACKER NEUSON ET18 (E12-02) Type: Mini excavator, crawler Serial number: WNCE1202TPAL04070 Year of manufacture: 2018 Mileage: 2,950 hours Technical specifications of the valuation item: Operating weight: 2,117 kg Transport weight: 1,974 kg Travel speed: 2.5 – 4.3 km/h Digging force – arm / bucket: 11,200 / 18,800 N Slewing speed: 10 rpm Engine: Model: YANMAR 3TNV76 - S ISO engine power: 13.7 kW / 2,200 rpm Type: diesel Displacement: 1,116 cm³ Number of cylinders: 3 Undercarriage: Track width: 230 mm Overall machine width: 990 – 1,300 mm (hydraulically adjusted) Hydraulic system: Pump capacity: 73 l/min Working pressure: 200 bar Tank capacity: 19 l System capacity: 33 l Dimensions: Total length: 3,854 mm Total width: 990 mm - 1,300 mm Total height: 2,392 mm (with cab) Ground clearance: 210 mm Equipment: - VDS system (cab tilt up to 15°) - Rubber tracks, - Folding blade, - Full cab with heating, - Radio, - Additional hydraulic outlet on the arm, - Digging bucket, approx. 280 mm wide, - Quick coupler. Technical Condition Description Nameplate: - Location – front frame. - Tampering/irregularities – missing. Identification Number: - Location – not located. Technical Documentation: - User Manual – missing. - Parts Catalog – missing. - Technical Specifications – missing. CE/EC Certificate: - Marking – yes, on the nameplate, - Declaration/Certificate of Conformity – none, - Engine – as indicated on the nameplate – meets the Chinese standard CN FC G3 00 0970000075 000001 – China Stage III, no markings on the nameplate indicating compliance with European standards. Operation history: - Service documentation – Inspection booklet – none. - Periodic inspection markings – marked on the inside of the engine compartment cover – "h 1949 19/06/2023", impossible to determine what the record refers to. - On-board computer readings – service interval exceeded by 501 hours. Technical condition: - Visual – satisfactory, - Wear – emergency, - Engine started, engine operation within the tested range was normal. No damage or excessive leaks were found. - Drive system – no visible defects; a test run of the drive systems was performed without a load. Tracks with cracks and material loss. The left track with a significant tear – requiring replacement. The track frame was significantly scratched with corrosion. - Working system – a test run of the working systems was performed without a load – irregularities were found, the excavator arm lowers automatically – both during operation and with the engine off – the technical condition of the hydraulic system needs to be verified in service conditions. The arm is scratched with chips and corrosion. Cylinders with minor mechanical damage. Blade with dents. - Damaged machine parts requiring repair/replacement: Body: - outer frame – scratched, chipped, corrosion spots, - engine compartment cover – scratched, dented and missing, - right cab window – cracked and missing, - radio antenna – torn from its mountings, incomplete, - cab side covers – chipped, scratched, - windshield frame – corrosion spots, - auxiliary handles – bent, corrosion spots, - counterweight – scratched, corrosion spots, - left door lock – broken from its mountings, - right door – window seal partially torn, Cab: - radio – does not turn on, - Air vents – broken and missing, - Door lock cover – broken, - Left joystick – missing the outer part of the upper button, - Right joystick – missing the outer part of the upper button, - Upper glass, roof – cracked. Missing parts: - Radio antenna mast, - Exterior mirrors with arms, - Lower arm actuator cover. = More information = Type number: Wacker Nauson ET18 (E12-02)