CAT 950 H

CAT 950H Wheel Loader – Full English Specifications Engine • Model: Cat C7 ACERT (6‑cylinder, inline) • Displacement: 7.2 L (439 in³) • Net Power (ISO 9249): 197 hp (147 kW) @ 1800 rpm • Net Power (SAE J1349): 195 hp (145 kW) @ 1800 rpm • Gross Power (SAE J1995): 217 hp (162 kW) • Peak Net Torque: 669 lb‑ft (907 N·m) @ 1400 rpm • Emissions: EPA Tier 3 / EU Stage IIIA Weights • Operating Weight: 40,435 lb (18,338 kg) • Static Tipping Load (Full Turn, Bucket): 24,068 lb (10,915 kg) • Static Tipping Load (Full Turn, Forks): 9,421 lb (4,273 kg) Bucket & Performance • Bucket Capacity: 2.5–3.5 m³ (3.25–4.5 yd³) • Reference Bucket: 3.1 m³ (4 yd³) general‑purpose • Bucket Width: 9.6 ft (2,927 mm) • Breakout Force: 37,125 lb (165 kN) • Dump Clearance: 9.59 ft (2,922 mm) • B‑Pin Height (Standard): 13.1 ft (3,992 mm) • B‑Pin Height (High‑Lift): 14.73 ft (4,490 mm) Hydraulics • Implement Pump Output: 71 gpm (269 lpm) • Relief Lift Pressure: 275 bar (3,988 psi) • Relief Tilt Pressure: 302 bar (4,380 psi) • Cycle Times: ◦ Raise: 6.2 sec ◦ Dump: 1.3–2.1 sec ◦ Lower (empty, float): 2.5 sec Dimensions • Wheelbase: 10.99 ft (3,350 mm) • Height (Top of ROPS): 11.3 ft (3,444 mm) • Ground Clearance: 1.35 ft (412 mm) • Length (Overall): ~27 ft (8,230 mm) Transmission & Speeds • Type: Planetary powershift (4F/4R) • Max Forward Speed: 23 mph (37 km/h) • Max Reverse Speed: 25 mph (40 km/h) Fluid Capacities • Fuel Tank: 83 gal (314 l) • Engine Oil: 7.9 gal (30 l) • Hydraulic Tank: 29 gal (110 l) • Cooling System: 11 gal (42 l) • Front Axle/Differential: 9.5 gal (36 l)