Інше Teknamotor Skorpion 500 RB (wood chipper) - Польща

ДОГОВІРНА
Відео Teknamotor -skorpion-500-rb-wood-chipper
БАЗОВА ІНФОРМАЦІЯ
Тип машиниІнше
Марка / модельTeknamotor Skorpion 500 RB (wood chipper)
Рік випуску2018
Додаткові опціїНовий
Країна
Польща
Mascus ID95A12832
ЦІНА
Ціна без врахування ПДВДоговірна
ДЕТАЛІ
Загальна оцінка (1-5)5
Сервісний договірТак
Транспортна вага3 700 kg
Додаткові пристроїStandard equipment:
- Axial chassis up to 25 km/h.
- Hydraulically folding loading table (flap) equipped with a chain feeder.
- Hydraulically foldable ejection tube with automatic control of swivel by 240° and deflector.
- Modern LED road lighting.
- PTO.
- Own hydraulic system.
- Electronic system of work control with hour meter.

Optional equipment:
- Sprung axle (towing speed 40 km/h) or air-type suspension (up to 80 km/h) equipped with air brakes.
- Hydraulic crane.
- Electronic control by joystick.
Додаткові інформаціїSkorpion 500 RB is the biggest drum chipper with a conveyor unit manufactured by our company. It is offered to companies and persons wanting to obtain chips in large amounts and uniform fractions. The machine belongs to the range of chippers drive from the tractor’s PTO shaft and the power required by the chipper is a min. of 120 HP (540÷750 rpm).

Due to the large overall dimensions of the shredded material with a diameter of up to 300 mm, the chipper is dedicated to the mechanical loading of wood wastes with the use of the HDS hydraulic crane and is equipped with a base for mounting the crane as standard. The large wood loading area and hopper with the dimensions of 550 x 370 mm allows shredding broad branches and other bulky wood wastes.

The feeding system consists of installed on a rocker 380 mm in dia. toothed upper roll, which pulls in and press the wood and toothed metal crawler (680 mm in length), preceded by the foldable feeding table with additional, 600 mm in length metal crawler. The roll and crawlers are both driven by hydraulic motors, powered by own hydraulic pump, installed on the chipper.

A sector-type drum with four cutting knives (one rotation of the drum for one full cut) allows to achieve a very high potential of the chipper with a relatively low power of the tractor. Knives can be sharpened several times – even 55 mm of the nominal size - assuring theirs long-term use.

Installed screen ensures high regularity if chips. Chips are advanced from under the screen to the fan by two screw conveyors, than discharged thorough the ejection tube. This chipper is equipped with hydraulically foldable ejection tube with automatic swivel control by 240°, both controlled by hydraulic divider or joystick.

The construction of the chipper is set on a single axial chassis allowing the towing of the machine on all types of roads. As a standard, the machine is equipped with a rigid suspension without brake, allowing to move it with a speed up to 25 km/h. Chipper can also be equipped with a sprung axle and 40 km/h towing speed or an air-type suspension and 80 km/h speed – both axles are equipped with air brakes.

The solution of positioning the feeding table at the angle of 90°, in relation to the direction of travel, allows simultaneous transport of the chipper and light trailer using only one tractor (the chipper is equipped with an automatic towbar).

The chipper is equipped with modern LED road lighting.

As a standard, the chipper is also additionally equipped with one of the most advanced electronic system of work control available on European market automatically protecting the propulsion system of the machine against overload/excessive duty through temporary stopping the feeding unit.

Easily editable software of the No-stress system provides a simple way to change the settings of the machine adapting it to individual needs. Preset "thick wood" and "thin wood" modes allow fast and easy change of the operation of the chipper in order to match the current material to be shred and increase the effectiveness of work. Total- and daily- hour meter is built into this system.

Overall dimensions (LxWxH) 3870 x 2360 (3000)* x 3025 (4460)* [mm]
Weight 3700** without hydraulic crane [kg]
Branch diameter logs up to 300 [mm]
No of knives 6 cutting + 1 counter-knife
Feeding speed up to 21 [running meters/min]
Chipping capacity up to 20 [stère meters/h]
Width of chips up to 35 depends on material [mm]
Drum diameter 520 [mm]
Hopper dimensions (WxH) 550 x 370 [mm]
Length of chain feeder loading table 680, flap 600 [mm]
Screen 30x30 or 50x50 [mm]
Method of feeding mechanically by crane
Type of drive tractor’s PTO
Min. power of tractor 120 [hp]

Teknamotor Sp. z o.o.

+48 ...ПОКАЗАТИ
Будь ласка, при контакті з продавцем посилайтеся на Mascus.
Відправити email

Contact Person

  • TOMASZ SZCZEPANIAK

    Teknamotor Sp. z o.o.
    • +48 ...ПОКАЗАТИ
      Будь ласка, при контакті з продавцем посилайтеся на Mascus.
    • +48 ...ПОКАЗАТИ
      Будь ласка, при контакті з продавцем посилайтеся на Mascus.
    • +48 ...ПОКАЗАТИ
      Будь ласка, при контакті з продавцем посилайтеся на Mascus.
    • Мови: Німецький, Англійський, Іспанський, Французький, Польський, Російський, Українська
    • ul. Świętokrzyska 2a, 27-400 Ostrowiec Świętokrzyski, Польща

Компанія

TEKNAMOTOR SP. Z O.O.
9
РОКІВ НА MASCUS

Повязані торгові марки

ВиробникКількість оголошень
John Deere1057
Timberjack481
Ponsse452
Valmet407
Caterpillar346
Оголошення про продаж Teknamotor -skorpion-500-rb-wood-chipper інше розміщено на Mascus, онлайн-ринку вживаної спецтехніки та обладнання Деталі - Загальна оцінка (1-5): 5, Сервісний договір: Так, Транспортна вага: 3 700 kg